2024 H&S Manufacturing Company, Inc. HPH4200 Series HPH4255

Information

2024 H&S Manufacturing Company, Inc. HPH4200 Series HPH4255

  • Center Drive System
  • Solid Virgin Grade Poly Floor & Sides
  • Channel Floor Supports Spaced at 9½” for Superior Strength
  • Easily Removable Beater Assembly
Features may include:
  • All horizontal beater hydraulic push models use solid virgin grade poly with UV inhibitor for the floor and sides, allowing less friction.
  • The hydraulic endgate has two cylinders with 3/8" hose and pipe for faster operation in cold weather.
  • Heavy-duty rectangular tubing is used for the pole to ensure strength and long life.
  • Structural channel floor supports are spaced 9 ½" apart are used for maximum floor strength.
  • Driveline protection is provided by a constant velocity PTO and straight shaft under the spreader connect to the rear mount angle gearbox, over to the beater drive sprocket, and then to the beater assembly.
  • The hydraulic push-off system on all models features two hydraulic cylinders that sequence to reduce push-off forces for fast unloading of material.
  • Beater blades are replaceable.
  • Beater assembly is removable for stockpiling manure.
  • Removal of the beater assembly is done by simply removing the mounting bolts and removing the drive chain to the beater assembly.
  • Choice of bullnose or clevis hitch
  • Poly bump rails
  • LED highway lighting
Options
  • Manual Adjust Hydraulic Variable Speed Pusher Control
  • Electric Adjust Hydraulic Variable Speed Pusher Control
  • 40,000# Safety Chain
  • Rear Pan

Photos

Highlights

  • Manheim, Pennsylvania
  • 2024
  • H&S Manufacturing Company, Inc.
  • HPH4200 Series HPH4255
  • Available
  • Inside: 72" (183 cm)
  • Side Loading: 81" (205.7 cm) | 2nd Beater: 86 3/4" (220 cm) | Top of Hyd. Endgate: 85 1/2" (218 cm) | at Top of Pusher: 95" (241 cm)

Specifications

  • 2024
  • H&S Manufacturing Company, Inc.
  • HPH4200 Series
  • HPH4255
  • Manure Spreader
  • Choices: 1 3/8" or 1 3/4" 1000 RPM w/Overrunning Clutch
  • Choices: 425 x 22.5 Used Truck Tires, or Heavy-Duty Tandem Axle w/600/50 x 22.5
  • Choices: Clevis or Bullnose
  • Horizontal Beater Diameter/Lower: 29″ (71 cm) | Horizontal Beater Diameter/Upper: 29″ (71 cm) | Hydraulic Push Cylinder Diameter: 4 1/2"
  • Side Loading: 81" (205.7 cm) | 2nd Beater: 86 3/4" (220 cm) | Top of Hyd. Endgate: 85 1/2" (218 cm) | at Top of Pusher: 95" (241 cm)
  • Inside: 72" (183 cm)
  • Inside: 15' (4.6 m)
  • Inside: 53" (135 cm)
  • w/Tires: 10′ 2" (310 cm)
  • 28' (8.5 m)
  • of Beaters: 2
  • Per ASAE S324.2: 383.39 Cu. Ft
  • Per ASAE S324.2: 511.27 Cu. Ft
  • w/Tires: 8,500 lbs.
  • 10 Bolt