2025 Pikrite Hydra-Pull Spreaders HP 1100

Information

2025 Pikrite Hydra-Pull Spreaders HP 1100

The HP 1100 is our largest spreader. It redefines capacity and versatility standards!

Efficient
  • Vertical beaters shred heavy material and provide a wide and consistent spread pattern
  • Compost beaters spread light material in a wide pattern at a controlled rate
  • Adjustable apron speed (0-16 ft. per min.)
  • Heavy duty walking beams
  • Road safety and field work lights
Durable
  • Side wind jack w/ safety chain
  • Robust pintle chain with stainless steel pins
  • Spring loaded take-up bearings allow for chain flex without damage
Operator Friendly
  • All bearings have easy access grease fitting banks
  • Sloped sides allow for easier loading
  • Hydraulic metering end gate contains free flowing material
  • Available in traditional green, industrial yellow, red or blue

Features may include:

  • 1100 bushel capacity
  • GEA tri-axle chassis, lift axle, front & rear steering
  • Detach beaters for high capacity forage wagon
  • Direct drive beater system
  • Heavy duty pintle chain
  • Metering guillotine endgate
  • Quick detach beaters (interchangeable for compost or vertical beaters)
  • Weigh scale installation ready
  • Clutch protected drivelines (slip/over-run)
  • Proudly made in the USA!

Photos

Highlights

  • Manheim, Pennsylvania
  • 2025
  • Pikrite
  • Hydra-Pull Spreaders HP 1100
  • Available
  • Inside of box: 60 in.-96 in.
  • Loading: 9 ft. 5 in.

Specifications

  • 2025
  • Pikrite
  • Hydra-Pull Spreaders
  • HP 1100
  • Manure Spreader
  • Tractor PTO HP (min. recommended): 250 HP | PTO speed: 1000
  • Beater speed: 420 RPM. | Number of unloading speeds: Infinite from 0-15.21 ft./min.
  • PTO shaft diameter: 1-3/4 in.
  • Loading: 9 ft. 5 in.
  • 11 ft. 5 in. (gate closed)
  • Inside of box: 60 in.-96 in.
  • W/flotation tires (tire size): 11 ft. 5 in. (28LR26)
  • 38 ft. 4 in.
  • Bed: 30 ft.
  • 34-5/8 in.
  • Of box: 53 in.
  • ASAE S324.1: 1370 cu. ft.
  • ASAE S324.1: 890 cu. ft.
  • Carrying capacity: 30 tons
  • Number of beaters: 2 | Number of paddles on beater: 70 | Number of end gate cylinders: 2
  • Tare: 26,500 lbs.